ABB ACS480 series AC Inverter for 0.37kW 230V 3ph motor to 2.4A at high overload, or 0.55kW to 3.5A when fan/pump rated. Operates in standard VxF or Sensorless Vector Control and converts 230V 1ph input to 230V 3ph to control the speed of a standard AC Induction Motor or Permanent Magnet motor.
Size R0: 73.5mm (W) x 205mm (H) x 208mm (D), 223mm (H) with Cable clamp. IP20
Weight: 1.7kg.
Overload: 150% x 60 seconds every 10 minutes (High Overload)
Overload: 110% x 60 seconds every 10 minutes (Fan/Pump rated)
Speed Control Range: 0-599Hz
Dynamic Braking (DBr): 0.37kW continuous for minimum 32.5 Ohms, maximum 316 Ohms external resistor (not supplied – see linked products below).
Removable Keypad with USB mini-B socket for PC connection included.
I/O module included: 2 Analogue Inputs, 6 Digital Inputs, 2 Analogue Outputs, 3 Relay Contact Sets, terminals for Modbus RTU (EIA-485) communications.
Terminals for dual channel SIL3/PL e safe torque off (STO) included.
DC bus terminals included.
Input Current: 7.8A.
Input Voltage: 200-240 Vac, +10%/-15%, 48 to 63 Hz
EMC compliance: EN 61800-3: 2004 + A1: 2012 Category C2 (Industrial or restricted Domestic) for motor cables up to 10m
Cubicle mount.
Rated Ambient: 50°C
Ventilation space above: 75mm, below: 75mm, at sides: 0mm.
Heat Loss at max output: 49W.
Mounting via 35mm DIN rail or 4 x 5mm diameter slotted holes at rear
Reviews
There are no reviews yet.